Several Older Ford Truck Parts

[Warrlord]

SOLD--Passenger side door, fits 73-79 F-Series & 78-79 Bronco. It's a new door, no hardware in it. Aftermarket (Eagle Automotive). No dents, no rust. Never been installed.--SOLD
Bellhousing, fits NP435 or T18 or toploader 4 sp, (typical butterfly pattern) to 351M, 400, 429, 460. Cast iron. $20.00

Standard trans Flywheel. Fits 429-460. Originally was for a Boss 429 Stang. I used to have this in my 72 F100 behind a 429. This flywheel works better than using a 390 flywheel for a 460/4sp conversion because it doesn't set the pressure plate back too far to rub against the bearing fork. It accepts up to a 12" clutch. The ring gear teeth are in great shape, not worn down, it could use a resurface though. it's never been resurfaced before. $25.00

Four 460 cyl heads, post 1973. Need to be rebuilt. Has all valves & springs.
$10.00 each

Pair of 460 car exhaust manifolds, no cracks, not warped. $20.00

SOLD--Brand new 429/460 Heddman Headers. Still in box. Fits 2wd F-Series. All bolts & gaskets & reducers included. Never been installed. Will not fit 429 Cobra Jet heads though.--SOLD

One Pro Comp XTerrain 35x12.50R-15. It was mounted on a wheel for a spare. Never driven on. $80.00. 4Wheel Parts list price is $200.99. No dry rot.

[cory]

if that flywheel fits the 462 as well i'll take it

[Warrlord]

if that flywheel fits the 462 as well i'll take it

I wouldn't know for sure. Never dealt with the 462. Is that an old Lincoln engine?

[cory]

yes parts for the motor are getting harder to find

[drklawz]

hey man, got a 78 bronco 400 v8 i'm working on... as it happens, the passenger side door is F*-d up. I'd be happy to take it off your hands. Is it primered?

[Warrlord]

hey man, got a 78 bronco 400 v8 i'm working on... as it happens, the passenger side door is F*-d up. I'd be happy to take it off your hands. Is it primered?

It has the original "black" primer/sealer coating that comes on new body parts. When & where would you like to get it?

[drklawz]

Sent you a PM.

[Mind_Boggler]

I think that I already know the answer to this qusetion, but will those headers fit 360/390 heads?? If so, I'm interested in them. ALthough, I don't think they will. Let me know, either way.

[bassdude]

i want that door. mines not that bad but for that price i'll take it if you still have it.
do you know what would keep those headers from fitting a four wheel drive? i would take them if i could make them fit even with a little persuasion.
how would you feel about bringing them over or me coming by to eyeball them with my truck to see if theres any major fit issues.

[Warrlord]

I think that I already know the answer to this qusetion, but will those headers fit 360/390 heads?? If so, I'm interested in them. ALthough, I don't think they will. Let me know, either way.

No, sorry. They won't fit 360/390 engines. :(

[Warrlord]

i want that door. mines not that bad but for that price i'll take it if you still have it.
do you know what would keep those headers from fitting a four wheel drive? i would take them if i could make them fit even with a little persuasion.
how would you feel about bringing them over or me coming by to eyeball them with my truck to see if theres any major fit issues.

Well, drklawz is wanting it too, he sent me a pm a couple days ago about meeting somewhere this weekend to get it. If it goes beyond this weekend then I'll get back to you. Since he asked first, (deal pending) I gotta give him first dibbs to be fair. Sound okay?

[bassdude]

what about the headers?

[Warrlord]

what about the headers?

:oops: Oops, sorry 'bout that. I forgot all about the headers part this morning.

I believe the reason for them not working on a 4wd is because of the front driveshaft interfering with it. You're more than welcome to try & fit 'em though. If you're lifted pretty good, it might not be a problem then. Let me know when you wnat to try 'em out.

Larry

[bassdude]

maybe i could check them out thi weekend. i'm thinking with the truck and headers right there together maybe i could see if it's even doable.

[Warrlord]

maybe i could check them out thi weekend. i'm thinking with the truck and headers right there together maybe i could see if it's even doable.

Yeah, that'll work. You can take 'em home with you if you want to, if they don't work I'll get them back whenever. That way you could measure things without feeling rushed. If you wanna pick 'em up during the week, I can bring 'em with me to work at Mike Shaw Buick in Motor City if that's doable or we can figure out a place to meet sometime. My # is 330-9302. What part of town are you in? I'm near Powers & Palmer Park just west of powers a couple blocks.

[bassdude]

i live right over by the safeway on nevada and cheyanne rd. what department are you in, i'll swing by.

[Warrlord]

I'm in the service dept, stuck in the back wrenching. If you walk into the shop & ask for Larry Hull, they'll get me or send you to me. I'll bring them tomorrow then. See ya. :)

[bassdude]

that'll work thanks Larry.

[Mind_Boggler]

Warrlord, if you still have the pass. door and headers, I'll take them! How's about $120 for both? Let me know.

[Warrlord]

Warrlord, if you still have the pass. door and headers, I'll take them! How's about $120 for both? Let me know.

I only have the headers left.

[Mind_Boggler]

:twisted: Headers are sold!

Now, where to get $400 for the rest of the exhaust....?