Anyone want custom business cards for RMFTC?

[mattadams]

If you check out the merchandise page, at http://rmftc.com/merchandise.html you can see the business cards I made up for myself. I put my name on them so I could use them and also so if other people wanted to use them, the people they would "card" etc. would have one main point of contact for the club if they wanted to contact someone.
But if anyone is interested in getting some of these cards made up with their own name, let me know. It's about $25 for 250 of them (10 cents a piece) plus some shipping (because I have to order them from an outside source that ships them to me). The minimum order for your own cards is 250 cards but I can also do 500, 750, or 1000... Or you can get the ones with my name on it for 10 cents a piece... no shipping because I already fronted the shipping charge myself.
http://rmftc.com/rmftccard.jpg

Some may remember the older cards for FTW that had the whole "come join our club, its open to everyone, its free" etc. but what I heard from some people is that it just seemed liek an advertisement and it was ignored, so doing it this way you can hand write "hey nice blue lifted truck! Come check us out!" or something on it, and they'll see it as a lot more "custom".

[clavos]

I would probibly get some of those.

[Walking Eagle]

The business cards look sharp. Now that I see this layout, I think it's a good design for the badges with a few minor changes. In the upper corner, the RMFTC.COM could be replaced with the person's user name if they want to include it. At the bottom remove the e-mail address and phone number and center in the city and state.


Once the business cards are ordered, approximately how long before they arrive?

[mattadams]

Jeff, thats not a bad idea... let me submit it and see what people think... I'll work on that :)
As far as the business cards, they were I think $19.99 for 250 (because I used a custom uploaded background and a custom card design - blank LOL) which were the non-matte's, then they charge about $8.50 s/h for standard service, which they say takes about 2 weeks, or you can pay more or less for faster or slower shipping.

[mattadams]

Hey Clavos, did you mean you wanted some custom ones or just the ones with my name on them or what?

[CNTRYCOWBOY]

How much would they be if I got some with my name on them??? I'd be interested if they were not too expensive.


Dom

[Walking Eagle]

Matt could you e-mail the file you use for the logo. I'm going to order some in the next few days. Thank you.

[mattadams]

The full hi-resolution version is available here: http://rmftc.com/fulllogo9.jpg
or for a lower resolution version you can use this:
http://rmftc.com/rmftclogo.jpg

Dom, they'd be about $30 for 250 (which includes shipping to me, but not to you) or about $50 for 500. I ordered 500 and I expect them anyday now.

[Walking Eagle]

Thank you Matt.

[Burg460]

I am still interested in getting some.

I would even go halfs or something with someone on them also.

[mattadams]

Ryan, do you mean wanting some with your name on them? If you just want some generic ones, mine should be delivered tomorrow, they'd be about 10 cents a piece.

[clavos]

I would want some with my name on them. Lord only knows when I will get something resembling a real job that will provide me with some.

[mattadams]

ok... well I'm just about to order Heaths probably this weekend, so if anyone wants some, let me know by then and if you can get me money before then that'd be preferred. LIke I said its about $30 for 250 or $45 for 50... which is about $1.50 above my cost, which is still one of hte best deals I found around town.

[clavos]

OK Matt, spelling is Niels Haubold, hook me up with the $30 for 250 deal, and I'll get you some cash on Sunday. Thanks.

[mattadams]

When ordering the cards, please also specify email and phone numbers you want on the cards, if applicable. That means you Neils (yeah yeah I know its spelled wrong LOL)

[clavos]

303-949-7673, clavos21@hotmail.com. Remember, I before E except after C.... LOL..

[Walking Eagle]

Matt, I'll take some also. I'll start out with 250 with my name Jeff Bakke and e-mail address. I'll give the money to you on Sunday. Thanks

[mattadams]

ok... I will probably order them as one big order... and unfortunately at this point due to some other major expenses, I will have to wait until I receive the money before I can order the cards :(. But I'll get em ordered in a jiff, mine arrived today, I like em :).

[mattadams]

never mind... I'll just put it on my card...

[mattadams]

ok, so right now I've got orders for cards from jeff, Heath, and Niels. niels, you ar ethe only one who hasn't said that the proof i sent you was ok, which I want to make sure of before I order $30 worth of cards :).

[clavos]

Just replied to your e-mail, looks sweet, order away.

[mattadams]

Business cards have been ordered and should be here by the June 27th show.

[mattadams]

Niels, Jeff, and Heath... your cards arrived today, in record time I believe! :)

[clavos]

Excellent, its turning out to be a pretty good day. My spindle socket just arrived from Matco too.

[Walking Eagle]

With all this good luck going on, I almost expected my parts from Phoenix Imaging to arrive completed correctly after 6 months. I had to pinch myself to come back to reality. Good news, they did say last weekend they would be shipping by the end of this week. I've got my fingers, legs, arms, eyes, etc. crossed for good luck.

[mattadams]

Jeff, I'll be crossin my fingers from ya! I'm hoping my cafepress shirt is going to come today I want to see how it looks.