Transfer Doubler

[1freaky1]

A while back someone was asking about doing a transfer case doubler for a ranger if I remember right. Well I finally came across the place I was reading about it again so here is the link:

http://images.google.com/imgres?imgurl=http://img131.imageshack.us/img131/2286/variastaller20021mediumlt9.jpg&imgrefurl=http://www.therangerstation.com/forums/showthread.php%3Ft%3D9843&usg=__tqiNIXdek9lqJD-p3kbCk2X_EOs=&h=600&w=800&sz=71&hl=en&start=223&tbnid

[Digger]

There have been several people who have built/sold doubler kits. The best one I have seen so far is the D&D Machine unit. The weak link is usually stub shaft. The D&D unit is hardened Crome-Moly.

[PaleBlue90]

There have been several people who have built/sold doubler kits. The best one I have seen so far is the D&D Machine unit. The weak link is usually stub shaft. The D&D unit is hardened Crome-Moly.

+1. theres a guy on the rangerstation who has made one from a BW1350 and BW1355 t-cases that were stock in rangers:idea::D