PDA

View Full Version : Rhino lining proved easier then I thought to remove


mattadams
06-20-2004, 04:19 PM
Well not the whole bed, at least not yet... LOL. But in order for body work to be doing on the truck (not just body work, entire repainting) the bed has to be removed and in order for that to happen, the bolts for the bed that were currently covered with Rhino Lining have to be removed. As I said I foudn it much easier then expected, just a razor blade and an attempt at making a good circle (LOL) and then a screwdriver to pry it away, and we were all set. Realzied that they actually thought ahead (wow can you believe it?) and put tape over the bolts, so the rhino lining didn't fill the star portion of the bolts like I was expecting. Took me about 5-10 per bolt, not as bad as I was thinking it might be :). I have two bolts left, but before I can do those I have to remove the rollbar... fun fun! :)

clavos
06-20-2004, 04:33 PM
Sounds like it wasn't too bad. At least the previous owner on mine had the good sense to take the bolts out before lining it.

Money-Pit
06-20-2004, 08:37 PM
I was gonna say...the people at Line-X removed my bolts before spraying the bed. That sure beats just putting tape over the holes. :wink:

mattadams
06-20-2004, 08:38 PM
I haven't been satisfied with my Rhino Lining since I bought the truck, but it goes much further then just the bolt problem, LOL.